數顯維氏硬度計的詳細信息

數顯顯微硬度計的詳細介紹   MVS-1000A1/D1數顯顯微硬度計造型新穎、美觀、而且它具有良好的可靠性，可操作性和直觀性。可通過測量壓痕對角線長度，直接在LCD屏幕上顯示硬度值。無需通過鍵盤輸入計算硬度值。    該機采用高倍率光學測量系統，裝有旋轉編碼器的測微目鏡可進一步提升測量過程自動化的程度。可測定鋼、有色金屬、IC薄片、薄塑料、金屬薄片、涂層、表面覆層、層壓金屬、熱處理碳化層和淬火硬化層的深度與硬度梯度。是一款價廉實用性強的數顯顯微硬度計。     MVS-1000A1/D1 digital micro hardness tester new form of dollars, beautiful,and it has a good reliability, interoperability and intuitive. By measuring the length of the diagonal indentation directly in the LCD screen hardness. Nokeyboard input through the calculation of the value of hardness.      The aircraft used high-rate optical measuring system, equipped with arotary encoder of the eyepiece micrometer will further enhance the process of measuring the degree of automation. Determination may be steel, nonferrousmetals, IC thin, thin plastic, foil, coating, surface coating, laminated metal, heattreatment hardening quenched carbide layer and layer of depth and hardnessgradient. Is a cheap and practical for a digital micro-hardness.   技術規格  顯微硬度標尺:  HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1  顯示:自動讀數菜單顯示5位數的硬度值       4位數的對角線長度（D1，D2）      試驗力,保持時間,測試次數,返回      試驗力(gf):10，25，50，100，200，300，500，1000  加載控制:自動（加載/保持/卸載）  試驗力保持時間(s):5～60  試驗力選擇:外置式選力旋鈕  物鏡放大倍數:10×，40×  光通道:雙光通道（目鏡及CCD攝象通道）  測量目鏡:自動數字式編碼器  總放大倍數(μm):100×（觀察）, 400×（測量）  硬度測量范圍:(5-2500)HV (對角線長度范圍:200μm)   分辨率(μm):0.01  XY試臺    尺寸(mm):100×100          行程范圍(mm):25×25          小讀數(mm):0.01  試件高度(mm):85（2.55")  試件寬度(mm):120(3.35")(從壓頭中心線至機壁距離）  輸出:內置微型打印機(選配)，（RS232串行接口）  電源電壓:AC220V/50HZ  外形尺寸(mm):490×310×515  重量(kg):35